Even experienced knife hands can enjoy the savings in time and effort by being handed a perfectly sharpened knife. For battlers, the change is revolutionary!
ENGINEERING
LOOK AT THE SUPERB CONSTRUCTION!
Gleaming stainless steel.
Direct drive - no belts, pulleys or tensioners to maintain.
8” (200mm) diameter honing wheels last and last.
Coolant is filtered before being returned to the reservoir so that pump always operates in clean coolant.
PURCHASING
Just a few very economical consumables.
OPERATOR
Quickly sharpen knives to a superb edge.
Wet honing with self-contained coolant system prevents knives overheating.
Easy-to-set precision adjustments of honing angles for different bevel (edge angle) settings.
Integrated semi-automatic precision wheel dressing system keeps wheels in perfect condition.
MANAGEMENT
A better bottom line, from both savings in the sharpening section and from increased productivity.
CODE
DESCRIPTION
SINGLE $ EA.
HONING WHEELS
HR8 7125
HR8 Honing Wheels - Complete set (Standard 220 Grit)
No limit on length, width or thickness of blade. Even a cleaver could be re-edged on a TRUHONE.
SAFETY
Upward-rotating wheels produce exact angles and will not "grab" the knife
The knife is enclosed in the body of the machine as it is guided across the honing wheels
TIME SAVING
Time-saving. It takes less than a minute to put a perfect edge on a blade with a TRUHONE.
Unique three-angle sharpening for a strong, long-lasting edge.
STEP 1. Angle adjustment on red dot.
Develops an equal bevel on both sides of the blade.
STEP 2. Angle adjustment on white dot.
Sets the edge. Perfects and strengthens the cutting edge created by the bevels.
STEP 3. Angle adjustment on blue dot.
Honing. Finishes the edge to a final razor sharpness.
Nicked or chipped edges quickly and easily restored.
REDRESSED WHEEL
EXCHANGE SERVICE
After sharpening hundreds of knives, the grinding wheels may wear out-of-round. Return your wheels to us. We will choose from our stock of redressed wheels a pair of equivalent diameter and send them off the same day.
See below for order code and price.
WHY HCF & LCF MODELS?
Although both models share the same rugged stainless steel case, have the same rugged 375 watt motor and the same full load feedback electronic speed controls, the HCF is equipped with a heavier-duty transmission system and is suitable for continuous use in excess of 4 hours per day.
Whatever method or machine you are currently using, to take the edge to the ultimate refinement, add a TRUHONE HCF or LCF fitted with HWD polishing wheels and the exclusive cleaning system.
Contrary to some old recommendations, the latest research proves that a polished edge will further reduce effort and muscular tension.
TRUHONE’s total control of the edge angle means that this unit can be set to match the angle at which the knife was ground. FEEL THE DIFFERENCE!
SM 110 / SM 111
Suited to medium-duty factory or intensive knife sharpener’s work, the F.Dick SM 110 and SM 111 machines have proved themselves to be rugged and reliable for many years.
Knives are thinned (one side at a time) on the large watercooled stones on each side and edged on the honing wheels in the V-notch on top of the machine.
THE SharpX SECRET!
The diamond-coated elastic blades in SHARPX machines quickly sharpen both sides of a knife simultaneously into a convex shape at the correct angle.
This ensures the knife is really sharp and allows the edge to be kept for as long as possible
The advantages of SharpX
Easy to use. Anybody can sharpen a knife in about 10 seconds
Superior sharpness. Razor-sharp result
Reduces the wear of the knife drastically and preserves its sharpness much longer
The PrimEdge knife maintenance unit can easily handle up to 100 knives per day. Both hollow-grinding and honing facilities are provided in one compact machine. Coolant pump places coolant directly on wheels and knives.
Model HG4S and HE4 “Twins”machines also available for precision edges on up to 400 knives per day.
